Flow range of conveyed liquid:1~120L/S

Lift range:30~160m

Supporting power range:1.5~200KW

Rated speed:2900r/min, 2850r/min

Smooth operation---Motor andpumpCoaxial, smooth operation, low noise, small vibration, high component concentricity;

Sealed and wear-resistant---Adopts carbide mechanical seal, which is wear-resistant, has long operating life, and has no pool leakage to ensure a clean environment;

Easy to install---The inlet and outlet diameters are the same, the center height is consistent, and installation is easy;

Any connection---pumpThe bottom of the body is equipped with a base and bolt holes for any rigid connection or flexible connection;

Complete exhaust---Set up a bleed valve to completely drainpumpair inside, make surepumpof normal startup.

Flow range of conveyed liquid:1~120L/S

Lift range:30~160m

Supporting power range:1.5~200KW

Rated speed:2900r/min, 2850r/min

Smooth operation---The motor and the pump are coaxial, running smoothly, with low noise and vibration, and high component concentricity;

Sealed and wear-resistant---Adopts carbide mechanical seal, which is wear-resistant, has long operating life, and has no pool leakage to ensure a clean environment;

Easy to install---The inlet and outlet diameters are the same, the center height is consistent, and installation is easy;

arbitrary join---The bottom of the pump body is equipped with a base and bolt holes for any rigid connection or flexible connection;

Complete exhaust--- Set up a bleed valve to completely drain the air in the pump to ensure normal startup of the pump.

Flow range of conveyed liquid:5~100L/S

Lift range:32~200m

Supporting power range:3~200KW

Rated speed:2900r/min

Flow range of conveyed liquid:5~500L/s

Lift range:15~160m

Supporting power range:30~400kw

Rated speed:1450~2900r/min

Control mode:Manual/automatic and remote control functions support manual control, automatic control, and remote control of the start and stop of the water pump, and the control mode can be switched;

Time setting:The control time of the diesel engine can be set, including: start delay time, preheating or pre-tuning time, start cutoff time, speed at start cutoff, rapid running time, speed-up process time, cooling stop time;

Alarm shutdown:Automatic alarm and shutdown items: no speed signal, overspeed, low speed, low oil pressure, high cooling temperature, start failure, shutdown failure, oil pressure sensor open circuit/short circuit, water temperature sensor open circuit/short circuit, speed sensor open circuit/short circuit,water pumpWater pressure is too low, etc.;

Early warning items:Pre-alarm items: overspeed, low speed, low oil pressure, high cooling temperature, low temperature, low fuel level, low battery voltage. High battery voltage, uncalibrated speed signal and low water pump pressure, etc.; status display:

Status display:Diesel engine operating status display: According to the current actual situation of the system, the current status of the equipment is displayed: waiting, starting, fuel supply, starting, starting delay, rapid delay, normal operation, clean shutdown, emergency shutdown;

Parameter display:Diesel engine parameter measurement display: During system operation, the current relevant parameter values ??are displayed: rotation speed, running time, fuel volume, battery voltage, cooling temperature, and oil pressure.

Flow range of conveyed liquid:5~500L/s

Lift range:15~160m

Supporting power range:30~400kw

Rated speed:1450~2900r/min

Flow range of conveyed liquid:1~5/s

Lift range:30~150m

Supporting power range:0.75~18.5

Rated speed:2900r/min

Material:Tank and pipeline carbon steel, ball sleeve pump body, stainless steel impeller, stainless steel shaft

The equipment canfire water supplyThe most unfavorable point of the pipeline system always maintains fire pressure, and uses the 30-second fire water volume always stored in the pneumatic water tank to ensurefire pumpFire sprinkler water before operation;

This equipment uses the operating pressure set by the pneumatic water tank to control the operating conditions of the water pump to achieve the function of boosting and stabilizing pressure;

●P1 (MPa) The most unfavorable point always maintains the pressure required for fire protection:

●P2 (MPa) fire pump starting pressure;

●PS1 (MPa) stabilizes the pump starting pressure;

●PS2 (MPa) stabilizes the pump stop pressure.

Flow range of conveyed liquid:1~5/s

Lift range:30~150m

Supporting power range:0.75~18.5

Rated speed:2900r/min

Material:Tank and pipeline carbon steel, ball sleeve pump body, stainless steel impeller, stainless steel shaft

The equipment canfire water supplyThe most unfavorable point of the pipeline system always maintains fire pressure, and uses the 30-second fire water volume always stored in the pneumatic water tank to ensurefire pumpbefore runningfire sprinkleruse water;

This equipment uses the operating pressure set by the pneumatic water tank to controlwater pumpoperating conditions, reachingBoost and stabilize voltagefunction;

●P1 (MPa) The most unfavorable point always maintains the pressure required for fire protection:

●P2(MPa)fire pumpPump starting pressure;

●PS1(MPa)Stabilizer pumpPump starting pressure;

●PS2(MPa)Stabilizer pumpStop pump pressure.

Flow range of conveyed liquid:1~50L/S

Lift range:30~220m

Supporting power range:0.45~160KW

Rated speed:2900r/min, 2850r/min

Vertical structure---BookpumpIt is a vertical, multi-level segmented structure.pumpThe inlet and outlet flanges are on the same horizontal axis and have the same diameter, which facilitates pipeline connection and is extremely convenient for loading and unloading;

Hydraulic balance---The impeller adopts hydraulic balancing method to balance the axial forcepumpThere is a guide bearing at the lower end, the shaft is fixedly driven through the clamp coupling and the motor shaft, and the outer cylinder is a stainless steel cylinder;

Sealing is reliable---The shaft seal adopts carbide mechanical seal, which has no leakage and no wear on the shaft, ensuring a clean working environment;

Extend life---The impeller and rotating friction parts are made of alloy, which is corrosion-resistant and rust-free. At the same time, it can avoid the generation of water and blockage of sprinklers and other fire-fighting devices, extending the service life.pumpservice life;

Hydraulic balance---Vertical multi-stage fire pressure stabilizing pumpLooking from the direction of the motor end,pumpFor counterclockwise rotation;Vertical multi-stage fire pumpViewed from the motor end, the pump rotates clockwise.

Flow range of conveyed liquid:1~50L/S

Lift range:30~220m

Supporting power range:0.45~160KW

Rated speed:2900r/min, 2850r/min

Vertical structure---BookpumpIt is a vertical, multi-level segmented structure.pumpThe inlet and outlet flanges are on the same horizontal axis and have the same diameter, which facilitates pipeline connection and is extremely convenient for loading and unloading;

Hydraulic balance---The impeller adopts hydraulic balancing method to balance the axial forcepumpThere is a guide bearing at the lower end, the shaft is fixedly driven through the clamp coupling and the motor shaft, and the outer cylinder is a stainless steel cylinder;

Sealing is reliable---The shaft seal adopts carbide mechanical seal, which has no leakage and no wear on the shaft, ensuring a clean working environment;

Extend life---The impeller and rotating friction parts are made of alloy, which is corrosion-resistant and rust-free. At the same time, it can avoid the generation of water and blockage of sprinklers and other fire-fighting devices, extending the service life.pumpservice life;

Hydraulic balance---Vertical multi-stage fire pressure stabilizing pumpLooking from the direction of the motor end,pumpFor counterclockwise rotation;Vertical multi-stage fire pumpLooking from the direction of the motor end,pumpfor clockwise rotation.

Flow range of conveyed liquid:1~5/s

Lift range:30~150m

Supporting power range:0.75~18.5

Rated speed:2900r/min

Material:Tank and pipeline carbon steel, ball sleeve pump body, stainless steel impeller, stainless steel shaft

The equipment canfire water supplyThe most unfavorable point of the pipeline system always maintains fire pressure, and uses the 30-second fire water volume always stored in the pneumatic water tank to ensurefire pumpbefore runningfire sprinkleruse water;

This equipment uses the operating pressure set by the pneumatic water tank to controlwater pumpoperating conditions, reachingBoost and stabilize voltagefunction;

●P1 (MPa) The most unfavorable point always maintains the pressure required for fire protection:

●P2(MPa)fire pumpPump starting pressure;

●PS1(MPa)Stabilizer pumpPump starting pressure;

●PS2(MPa)Stabilizer pumpStop pump pressure.

Control mode:Manual/automatic, remote control functions support manual control, automatic control, and remote controlwater pumpThe start, stop and control modes can be switched;

Time setting:The control time of the diesel engine can be set, including: start delay time, preheating or pre-tuning time, start cut-off time, start-cut speed, rapid running time, speed-up process time, cooling down time;

Alarm shutdown:Automatic alarm and shutdown items: no speed signal overspeed, low speed, low oil pressure, high cooling temperature, start failure, shutdown failure, oil pressure sensor open circuit/short circuit, water temperature sensor open circuit/short circuit, speed sensor open circuit/short circuitwater pumpWater pressure is too low, etc.;

Early warning items:Pre-alarm items: over speed, low speed, low oil, high cooling temperature, low temperature, low fuel level, low battery voltage, high battery voltage, speed signal is not calibrated andpumpWater pressure is too low, etc.

Status display:Diesel engine operating status display: According to the current actual situation of the system, the current status of the equipment is displayed: waiting, engine, fuel supply, start, start delay, rapid delay, normal operation, clean shutdown, emergency shutdown;

Parameter display:Diesel engine parameter measurement display: During system operation, the current relevant parameter values ??are displayed: rotation speed, running time fuel volume, battery voltage, cooling temperature, and oil pressure.

Flow range of conveyed liquid:5~500L/s

Lift range:15~160m

Supporting power range:28~1150kw

Rated speed:1450~2900r/min

The medium weight does not exceed 1240kg/m';
The ambient temperature is

The self-priming height cannot exceed 4.5~5.5 meters, and the length of the suction pipe is

The rotation speed is generally 1450r/min~3000r/min.

XBC-QYS typeDiesel engine fire pump unitIt is in accordance with the standard requirements and test methods. The B6245-2006《fire pumpThe performance series products have a wide range of lift and flow, which can fully meet the requirements of various occasions such as warehouse factories, liquefied gas stations, textile and other terminals, airports, petrochemical, electrical and mining enterprises.fire water supply. The advantage is that the building is protectedpumpUnable to start, after the diesel engine power system suddenly loses powerElectric fire pumpAutomatically start investmentemergency water supply.

Control mode:Manual/automatic, remote control functions support manual control, automatic control, and remote controlwater pumpThe start, stop and control modes can be switched;

Time setting:The control time of the diesel engine can be set, including: start delay time, preheating or pre-tuning time, start cut-off time, start-cut speed, rapid running time, speed-up process time, cooling down time;

Alarm shutdown:Automatic alarm and shutdown items: no speed signal overspeed, low speed, low oil pressure, high cooling temperature, start failure, shutdown failure, oil pressure sensor open circuit/short circuit, water temperature sensor open circuit/short circuit, speed sensor open circuit/short circuitwater pumpWater pressure is too low, etc.;

Early warning items:Pre-alarm items: over speed, low speed, low oil, high cooling temperature, low temperature, low fuel level, low battery voltage, high battery voltage, speed signal is not calibrated andpumpWater pressure is too low, etc.

Status display:Diesel engine operating status display: According to the current actual situation of the system, the current status of the equipment is displayed: waiting, engine, fuel supply, start, start delay, rapid delay, normal operation, clean shutdown, emergency shutdown;

Parameter display:Diesel engine parameter measurement display: During system operation, the current relevant parameter values ??are displayed: rotation speed, running time fuel volume, battery voltage, cooling temperature, and oil pressure.

Flow range of conveyed liquid:5~500L/s

Lift range:15~160m

Supporting power range:28~1150kw

Rated speed:1450~2900r/min

The medium weight does not exceed 1240kg/m';
The ambient temperature is

The self-priming height cannot exceed 4.5~5.5 meters, and the length of the suction pipe is

The rotation speed is generally 1450r/min~3000r/min.

XBC-QYS typeDiesel engine fire pump unitIt is in accordance with the standard requirements and test methods. The B6245-2006《fire pumpThe performance series products have a wide range of lift and flow, which can fully meet the requirements of various occasions such as warehouse factories, liquefied gas stations, textile and other terminals, airports, petrochemical, electrical and mining enterprises.fire water supply. The advantage is that the building's anti-pump cannot be started and the diesel engine power system suddenly loses power.Electric fire pumpAutomatically activate emergency water supply.

Control motor power:0.75~22KW

Control voltage:380V

frequency:50HZ

controlwater pumpQuantity:1~4 units

Control motor power:0.75~22KW

Control voltage:380V

frequency:50HZ

controlwater pumpQuantity:1~4 units

Control motor power:15~250KW

Control voltage:380V

controlwater pumpQuantity:1~4 units