Vertical structure:pumpIt is a vertical structure with the same inlet and outlet diameters and located on the same center line. It can be installed in the pipeline like a valve. It has a compact and beautiful appearance, a small footprint, and low construction investment. If a protective cover is added, it can be placed For outdoor use;

Smooth operation:The impeller is directly installed on the extended shaft of the motor, with short axial size and compact structure.pumpReasonably configured with motor bearings, it can effectively balancepumpradial and axial loads generated by operation, thus ensuringpumpSmooth operation, small vibration and low noise;

Mechanical seal:The shaft seal adopts mechanical seal or mechanical seal combination, imported titanium alloy sealing ring, medium-sized high temperature resistant mechanical seal and carbide material, wear-resistant seal, which can effectively extend the service life of the mechanical seal;

Series and parallel connection:It can be used according to the usage requirements, that is, the flow rate and head.pumpSeries and parallel operation modes;

Available anyway:Can be used according to the requirements of pipeline layoutpumpVertical and horizontal installation.

?

Flow range of conveyed liquid:1.8~1400m'/h

Lift range:≤127m

Supporting power range:37-355KW

Rated speed:2960rmin, 1480r/min or 980r/min

Ambient temperature

The volume content of solid particles in the conveyed medium does not exceed 0.1% of the unit volume.

Particle size

orpumpThe maximum working pressure of the system is ≤1.6MPa

Right nowpumpSuction pressure+pumpLift ≤1.6MPa.

Non-clogging submersible sewage pumpIt is based on the introduction of advanced foreign technology and combined with domesticwater pumpA new generation of products successfully developed based on the usage characteristics ofpumpThis kind of product has the characteristics of significant energy saving effect, anti-winding, no clogging, automatic installation and automatic control. It has a unique effect in discharging solid particles and long fiber waste.

The seriespumpIt adopts a unique impeller structure and new type of mechanical seal, which can effectively deliver solid materials and long fibers. Compared with traditional impellers, the impellerpumpThe impeller adopts the form of single flow channel or double flow channel, which is similar to an elbow with the same cross-section size. It has very good flow performance and is equipped with a reasonable scroll chamber, making thepumpIt has high efficiency and the impeller has passed dynamic and static balance tests, making itpumpNo vibration during operation.

Flow range of conveyed liquid:2~6000m3/h

Lift range:3~70m

Supporting power range:0.37~355KW

Caliber range:Ф25~Ф800mm

The medium temperature is

The pH value is in the range of 5~9;

Pump without internal gravity circulation cooling system,

The motor part shall not be exposed to more than 1/2 of the liquid surface;

It cannot be used to pump highly corrosive liquids.

1. The unique single-blade or double-blade impeller structure greatly improves the dirt passing capacity and can effectively pass through the impeller.pump5 times the diameter of the fiber material and the diameter ispumpSolid particles with a diameter of about 50%, and the mechanical seal uses a new type of hard and corrosion-resistant titanium tungsten material, which canpumpSafe and continuous operation for more than 8,000 hours.

2. The overall structure is compact, small in size, low in noise, significant in energy saving, easy to maintain and requires no construction.pump room, you can work by diving into the water, which greatly reduces the project cost.pumpA high-precision anti-interference water leakage detection sensor is installed in the sealing oil chamber, and thermal components are pre-embedded in the stator winding.water pumpAutomatic motor protection.

3. A fully automatic control cabinet can be equipped according to user needs.pumpAutomatic protection of water leakage, electric leakage, overload and over-temperature, etc., which improves the safety and reliability of the product. The float switch can automatically control according to the required liquid level changes.pumpThe starting and stopping of the machine does not require special supervision and is extremely convenient to use.

4. The WQ series can be equipped with a double guide rail automatic coupling installation system according to user needs, which brings greater convenience to installation and maintenance. People do not have to enter the sewage pit for this, and can be used within the full lift, ensuring that the motor will not pass overload.

5. There are two different installation methods, fixed automatic coupling installation system and mobile free installation system.

Suitable for chemical industry, petroleum, pharmaceutical, mining, paper industry, cement plant, steel plant, power plant, coal processing industry, and citiessewage treatmentIt can also be used to pump clean water and corrosive media to remove particles of sewage and dirt from conveyor belts in factory drainage systems, municipal engineering, construction sites and other industries.

Non-clogging submersible sewage pumpIt is based on the introduction of advanced foreign technology and combined with domesticwater pumpA new generation of products successfully developed based on the usage characteristics ofpumpThis kind of product has the characteristics of significant energy saving effect, anti-winding, no clogging, automatic installation and automatic control. It has a unique effect in discharging solid particles and long fiber waste.

The seriespumpIt adopts a unique impeller structure and new type of mechanical seal, which can effectively deliver solid materials and long fibers. Compared with traditional impellers, the impellerpumpThe impeller adopts the form of single flow channel or double flow channel, which is similar to an elbow with the same cross-section size. It has very good flow performance and is equipped with a reasonable scroll chamber, making thepumpIt has high efficiency and the impeller has passed dynamic and static balance tests, making itpumpNo vibration during operation.

Flow range of conveyed liquid:2~6000m3/h

Lift range:3~70m

Supporting power range:0.37~355KW

Caliber range:Ф25~Ф800mm

The medium temperature is

The pH value is in the range of 5~9;

Without internal gravity circulation cooling systempump,

The motor part shall not be exposed to more than 1/2 of the liquid surface;

It cannot be used to pump highly corrosive liquids.

1. The unique single-blade or double-blade impeller structure greatly improves the dirt passing capacity and can effectively pass through the impeller.pump5 times the diameter of the fiber material and the diameter ispumpSolid particles with a diameter of about 50%, and the mechanical seal uses a new type of hard and corrosion-resistant titanium tungsten material, which canpumpSafe and continuous operation for more than 8,000 hours.

2. The overall structure is compact, small in size, low in noise, significant in energy saving, and easy to maintain. There is no need to build a pump room and it can work when submerged in water, which greatly reduces the project cost.pumpA high-precision anti-interference water leakage detection sensor is installed in the sealing oil chamber, and thermal components are pre-embedded in the stator winding.water pumpAutomatic motor protection.

3. A fully automatic control cabinet can be equipped according to user needs.pumpAutomatic protection of water leakage, electric leakage, overload and over-temperature, etc., which improves the safety and reliability of the product. The float switch can automatically control according to the required liquid level changes.pumpThe starting and stopping of the machine does not require special supervision and is extremely convenient to use.

4. The WQ series can be equipped with a double guide rail automatic coupling installation system according to user needs, which brings greater convenience to installation and maintenance. People do not have to enter the sewage pit for this, and can be used within the full lift, ensuring that the motor will not pass overload.

5. There are two different installation methods, fixed automatic coupling installation system and mobile free installation system.

Suitable for chemical industry, petroleum, pharmaceutical, mining, paper industry, cement plant, steel plant, power plant, coal processing industry, and citiessewage treatmentIt can also be used to pump clean water and corrosive media to remove particles of sewage and dirt from conveyor belts in factory drainage systems, municipal engineering, construction sites and other industries.

Flow range of conveyed liquid:2~6000m3/h

Lift range:3~70m

Supporting power range:0.37~355KW

Caliber range:Ф25~Ф800mm

The medium temperature is

The pH value is in the range of 5~9;

Without internal gravity circulation cooling systempump,

The motor part shall not be exposed to more than 1/2 of the liquid surface;

It cannot be used to pump highly corrosive liquids.

1. The unique single-blade or double-blade impeller structure greatly improves the dirt passing capacity and can effectively pass through the impeller.pump5 times the diameter of the fiber material and the diameter ispumpSolid particles with a diameter of about 50%, and the mechanical seal uses a new type of hard and corrosion-resistant titanium tungsten material, which canpumpSafe and continuous operation for more than 8,000 hours.

2. The overall structure is compact, small in size, low in noise, significant in energy saving, easy to maintain and requires no construction.pump room, you can work by diving into the water, which greatly reduces the project cost.pumpA high-precision anti-interference water leakage detection sensor is installed in the sealing oil chamber, and thermal components are pre-embedded in the stator winding.water pumpAutomatic motor protection.

3. A fully automatic control cabinet can be equipped according to user needs.pumpAutomatic protection of water leakage, electric leakage, overload and over-temperature, etc., which improves the safety and reliability of the product. The float switch can automatically control according to the required liquid level changes.pumpThe starting and stopping of the machine does not require special supervision and is extremely convenient to use.

4. The WQ series can be equipped with a double guide rail automatic coupling installation system according to user needs, which brings greater convenience to installation and maintenance. People do not have to enter the sewage pit for this, and can be used within the full lift, ensuring that the motor will not pass overload.

5. There are two different installation methods, fixed automatic coupling installation system and mobile free installation system.

Suitable for chemical industry, petroleum, pharmaceutical, mining, paper industry, cement plant, steel plant, power plant, coal processing industry, and citiessewage treatmentIt can also be used to pump clean water and corrosive media to remove particles of sewage and dirt from conveyor belts in factory drainage systems, municipal engineering, construction sites and other industries.

Flow range of conveyed liquid:2~6000m3/h

Lift range:3~70m

Supporting power range:0.37~355KW

Caliber range:Ф25~Ф800mm

The medium temperature is

The pH value is in the range of 5~9;

Without internal gravity circulation cooling systempump,

The motor part shall not be exposed to more than 1/2 of the liquid surface;

It cannot be used to pump highly corrosive liquids.

1. The unique single-blade or double-blade impeller structure greatly improves the dirt passing capacity and can effectively pass through the impeller.pump5 times the diameter of the fiber material and the diameter ispumpSolid particles with a diameter of about 50%, and the mechanical seal uses a new type of hard and corrosion-resistant titanium tungsten material, which canpumpSafe and continuous operation for more than 8,000 hours.

2. The overall structure is compact, small in size, low in noise, significant in energy saving, easy to maintain and requires no construction.pump room, you can work by diving into the water, which greatly reduces the project cost.pumpA high-precision anti-interference water leakage detection sensor is installed in the sealing oil chamber, and thermal components are pre-embedded in the stator winding.water pumpAutomatic motor protection.

3. A fully automatic control cabinet can be equipped according to user needs.pumpAutomatic protection of water leakage, electric leakage, overload and over-temperature, etc., which improves the safety and reliability of the product. The float switch can automatically control according to the required liquid level changes.pumpThe starting and stopping of the machine does not require special supervision and is extremely convenient to use.

4. The WQ series can be equipped with a double guide rail automatic coupling installation system according to user needs, which brings greater convenience to installation and maintenance. People do not have to enter the sewage pit for this, and can be used within the full lift, ensuring that the motor will not pass overload.

5. There are two different installation methods, fixed automatic coupling installation system and mobile free installation system.

Suitable for chemical industry, petroleum, pharmaceutical, mining, paper industry, cement plant, steel plant, power plant, coal processing industry, and citiessewage treatmentIt can also be used to pump clean water and corrosive media to remove particles of sewage and dirt from conveyor belts in factory drainage systems, municipal engineering, construction sites and other industries.

Self-priming pumpIt is self-primingcentrifugal pump, it has the advantages of compact structure, easy operation, smooth operation, convenient maintenance, high efficiency, long life, and strong self-priming ability. There is no need to install a bottom valve in the pipeline, just keep it before workpumpOnly a quantitative amount of fluid can be stored in the body, thus simplifying the pipeline system and improving working conditions.

Flow range of conveyed liquid:1.8~1400m°/h

Lift range:

Supporting power range:0.37~355KN

Rated speed:2960r/min, 1480rmin or 980r/min

Ambient temperature

The volume content of solid particles in the conveyed medium does not exceed unit

0.1% of the volume, particle size

orpumpThe maximum working pressure of the system is ≤1.6MPa,

Right nowpumpSuction pressure+pumpLift ≤1.6MPa.

1. Suitable for urban environmental protection, construction, fire protection, chemical industry, pharmaceuticals, dyes, printing and dyeing, brewing, electric power, electroplating, papermaking, petroleum, mining, equipment, cooling, tanker unloading, etc.

2. Suitable for clean water, seawater, chemical media liquids with acidity and alkalinity, and slurries with a similar pasty state (medium viscosity ≤ 100 centipoise, solid content up to 30% or less)

3. Equipped with a rocker-type sprinkler head, the water can be flushed into the air and dispersed into fine raindrops for spraying. It is a good machine for farms, nurseries, orchards, and tea gardens.

4. It can be used with any model and specification of filter press. It is the most ideal matching pump to send the slurry to the filter for press filtering.

Non-clogging submersible sewage pumpIt is based on the introduction of advanced foreign technology and combined with domesticwater pumpThe new generation of pump products successfully developed based on the usage characteristics has the characteristics of significant energy saving effect, anti-winding, no clogging, automatic installation and automatic control. It has a unique effect in discharging solid particles and long fiber waste.

This series of pumps adopts a unique impeller structure and new type of mechanical seal, which can effectively deliver solids and long fibers. Compared with the traditional impeller, the impeller of this pump adopts the form of single flow channel or double flow channel. It is similar to an elbow with the same cross-section size. It has very good flow performance and is equipped with a reasonable volute, making the pump highly efficient. The impeller and impeller have undergone dynamic and static balance tests to ensure that the pump does not vibrate during operation.

Flow range of conveyed liquid:2~6000m3/h

Lift range:3~70m

Supporting power range:0.37~355KW

Caliber range:Ф25~Ф800mm

The medium temperature is

The pH value is in the range of 5~9;

Pump without internal gravity circulation cooling system,

The motor part shall not be exposed to more than 1/2 of the liquid surface;

It cannot be used to pump highly corrosive liquids.

1. It adopts a unique single-blade or double-blade impeller structure, which greatly improves the dirt passing capacity. It can effectively pass 5 times the fiber material of the pump caliber and solid particles with a diameter of about 50% of the pump caliber. The mechanical seal adopts a new type of hard material. The corrosion-resistant tungsten titanium material allows the pump to operate safely and continuously for more than 8,000 hours.

2. The overall structure is compact, small in size, low in noise, significant in energy saving, and easy to maintain. There is no need to build a pump room and it can work when submerged in water, which greatly reduces the project cost. The sealing oil chamber of the pump is equipped with a high-precision anti-interference water leakage detection system. The sensor has a thermal element embedded in the stator winding.water pumpAutomatic motor protection.

3. A fully automatic control cabinet can be equipped according to user needs to automatically protect the pump from water leakage, leakage, overload and over-temperature, etc., which improves the safety and reliability of the product. The float switch can automatically adjust the pump according to the required liquid level changes. It controls the starting and stopping of the pump without the need for special supervision and is extremely convenient to use.

4. The WQ series can be equipped with a double guide rail automatic coupling installation system according to user needs, which brings greater convenience to installation and maintenance. People do not have to enter the sewage pit for this, and can be used within the full lift, ensuring that the motor will not pass overload.

5. There are two different installation methods, fixed automatic coupling installation system and mobile free installation system.

Suitable for chemical industry, petroleum, pharmaceutical, mining, paper industry, cement plant, steel plant, power plant, coal processing industry, and citiessewage treatmentIt can also be used to pump clean water and corrosive media to remove particles of sewage and dirt from conveyor belts in factory drainage systems, municipal engineering, construction sites and other industries.

Self-priming pumpIt is self-primingcentrifugal pump, it has the advantages of compact structure, easy operation, smooth operation, convenient maintenance, high efficiency, long life, and strong self-priming ability. There is no need to install a bottom valve in the pipeline, just keep it before workpumpOnly a quantitative amount of fluid can be stored in the body, thus simplifying the pipeline system and improving working conditions.

Flow range of conveyed liquid:1.8~1400m°/h

Lift range:

Supporting power range:0.37~355KN

Rated speed:2960r/min, 1480rmin or 980r/min

Ambient temperature

The volume content of solid particles in the conveyed medium does not exceed unit

0.1% of the volume, particle size

orpumpThe maximum working pressure of the system is ≤1.6MPa,

Right nowpumpSuction pressure+pumpLift ≤1.6MPa.

1. Suitable for urban environmental protection, construction, fire protection, chemical industry, pharmaceuticals, dyes, printing and dyeing, brewing, electric power, electroplating, papermaking, petroleum, mining, equipment, cooling, tanker unloading, etc.

2. Suitable for clean water, seawater, chemical media liquids with acidity and alkalinity, and slurries with a similar pasty state (medium viscosity ≤ 100 centipoise, solid content up to 30% or less)

3. Equipped with a rocker-type sprinkler head, the water can be flushed into the air and dispersed into fine raindrops for spraying. It is a good machine for farms, nurseries, orchards, and tea gardens.

4. It can be used with any model and specification of filter press. It is the most ideal match to send the slurry to the filter for press filtering.pump.

Integrated stainless steel sewage lifting equipmentIt adopts a fully enclosed overall structure design, and the box and pipelines are made of SUS304 stainless steel with good resistance to external forces.pumpAnd the pipeline is built-in, which greatly saves the installation space of the equipment. It is equipped with an extended coupling device for convenient maintenance. The full-flow water outlet pipeline is equipped with a stainless steel quick-installation spherical check valve independently developed by our company. The PLC intelligent control system can realize the equipment Alternate work, it is a high-quality small spaceSewage lifting equipment.

Integrated box structure, no odor and quieter;

Supply voltage:Three-phase 380V Ac±10%

Power frequency:50Hz±10%;

Cabinet:SUS 304/316 stainless steel;

water pumpProtection level:IP68;

water pumpInsulation level:F115℃;

Sewage density:≤1200kg/m

Ambient temperature:The medium temperature does not exceed 40℃, and the instant temperature does not exceed 60℃;

Relative humidity:0° (non-freezing) ~ 40°C relative humidity 20% ~ 90% and no corrosive, flammable or explosive liquids in the working environment;

Installation environment:The installation site must be free of conductive or flammable dust, gases or other media that corrode metal and damage insulation;

Altitude:The normal working condition is less than 1000m, and other working condition requirements can be achieved by adjusting the control components;

Power supply:The power frequency is 50±5HZ. The default voltage is three-phase AC 380V±10%, with "D" indicating 220V two-phase AC voltage.

Sealing structure:It adopts a closed box structure, which saves space, has no odor and is ultra-quiet; the box comes with a large inspection port: it is equipped with an extended coupling device for easy installation and maintenance;

Overlay:ConfigurationSelf-cutting sewage pump,pairpumpCan automatically run alternately, serve as backup for each other, and crush impurities without clogging;

Maintain constant pressure:Full flow channel design, the inlet and outlet pipes are equipped with stainless steel quick-install spherical check valves to prevent backflow and blocking;

Highly intelligent:The guide rail, water distribution device, square tube base and fixed bracket are all made of SUS304 stainless steel, which is stable and durable;

Save investment:Liquid level detector, controlled by 316 stainless steel electrodeswater pumpStart and stop, responsive, anti-corrosion and durable;

Save running costs:Intelligent control system, PLC smart light control system, can be remotely monitored, takes into account manual and automatic functions, and has phase loss, overload,water pumpAnti-rust magnets and other protective functions ensure no overflow.

Subway stations, underground passages, underground garages, underground civil air defense projectssewage liftingemission;

Catering, kitchens, supermarkets, entertainment centers, business buildings, hotels and other commercial service placessewage liftingemission;

Various types of residential areas, villas, civil buildings and other small and medium-sized unmanned sewage transportation station discharge sites;

Harmless treatment and standard discharge of sewage from outpatient clinics and wards of various hospitals.

Integrated stainless steel sewage lifting equipmentIt adopts a fully enclosed overall structure design, and the box and pipelines are made of SUS304 stainless steel with good resistance to external forces.pumpAnd the pipeline is built-in, which greatly saves the installation space of the equipment. It is equipped with an extended coupling device for convenient maintenance. The full-flow water outlet pipeline is equipped with a stainless steel quick-installation spherical check valve independently developed by our company. The PLC intelligent control system can realize the equipment Alternate work, it is a high-quality small spaceSewage lifting equipment.

Integrated box structure, no odor and quieter;

Supply voltage:Three-phase 380V Ac±10%

Power frequency:50Hz±10%;

Cabinet:SUS 304/316 stainless steel;

water pumpProtection level:IP68;

water pumpInsulation level:F115℃;

Sewage density:≤1200kg/m

Ambient temperature:The medium temperature does not exceed 40℃, and the instant temperature does not exceed 60℃;

Relative humidity:0° (non-freezing) ~ 40°C relative humidity 20% ~ 90% and no corrosive, flammable or explosive liquids in the working environment;

Installation environment:The installation site must be free of conductive or flammable dust, gases or other media that corrode metal and damage insulation;

Altitude:The normal working condition is less than 1000m, and other working condition requirements can be achieved by adjusting the control components;

Power supply:The power frequency is 50±5HZ. The default voltage is three-phase AC 380V±10%, with "D" indicating 220V two-phase AC voltage.

Sealing structure:It adopts a closed box structure, which saves space, has no odor and is ultra-quiet; the box comes with a large inspection port: it is equipped with an extended coupling device for easy installation and maintenance;

Overlay:ConfigurationSelf-cutting sewage pump,pairpumpCan automatically run alternately, serve as backup for each other, and crush impurities without clogging;

Maintain constant pressure:Full flow channel design, the inlet and outlet pipes are equipped with stainless steel quick-install spherical check valves to prevent backflow and blocking;

Highly intelligent:The guide rail, water distribution device, square tube base and fixed bracket are all made of SUS304 stainless steel, which is stable and durable;

Save investment:Liquid level detector, controlled by 316 stainless steel electrodeswater pumpStart and stop, responsive, anti-corrosion and durable;

Save running costs:Intelligent control system, PLC smart light control system, can be remotely monitored, takes into account manual and automatic functions, and has phase loss, overload,water pumpAnti-rust magnets and other protective functions ensure no overflow.

Subway stations, underground passages, underground garages, underground civil air defense projectssewage liftingemission;

Catering, kitchens, supermarkets, entertainment centers, business buildings, hotels and other commercial service placessewage liftingemission;

Various types of residential areas, villas, civil buildings and other small and medium-sized unmanned sewage transportation station discharge sites;

Harmless treatment and standard discharge of sewage from outpatient clinics and wards of various hospitals.

Integrated stainless steel sewage lifting equipmentIt adopts a fully enclosed overall structure design, and the box and pipelines are made of SUS304 stainless steel with good resistance to external forces.pumpAnd the pipeline is built-in, which greatly saves the installation space of the equipment. It is equipped with an extended coupling device for convenient maintenance. The full-flow water outlet pipeline is equipped with a stainless steel quick-installation spherical check valve independently developed by our company. The PLC intelligent control system can realize the equipment Alternate work, it is a high-quality small spaceSewage lifting equipment.

Integrated box structure, no odor and quieter;

Supply voltage:Three-phase 380V Ac±10%

Power frequency:50Hz±10%;

Cabinet:SUS 304/316 stainless steel;

water pumpProtection level:IP68;

water pumpInsulation level:F115℃;

Sewage density:≤1200kg/m

Ambient temperature:The medium temperature does not exceed 40℃, and the instant temperature does not exceed 60℃;

Relative humidity:0° (non-freezing) ~ 40°C relative humidity 20% ~ 90% and no corrosive, flammable or explosive liquids in the working environment;

Installation environment:The installation site must be free of conductive or flammable dust, gases or other media that corrode metal and damage insulation;

Altitude:The normal working condition is less than 1000m, and other working condition requirements can be achieved by adjusting the control components;

Power supply:The power frequency is 50±5HZ. The default voltage is three-phase AC 380V±10%, with "D" indicating 220V two-phase AC voltage.

Sealing structure:It adopts a closed box structure, which saves space, has no odor and is ultra-quiet; the box comes with a large inspection port: it is equipped with an extended coupling device for easy installation and maintenance;

Overlay:ConfigurationSelf-cutting sewage pump,pairpumpCan automatically run alternately, serve as backup for each other, and crush impurities without clogging;

Maintain constant pressure:Full flow channel design, the inlet and outlet pipes are equipped with stainless steel quick-install spherical check valves to prevent backflow and blocking;

Highly intelligent:The guide rail, water distribution device, square tube base and fixed bracket are all made of SUS304 stainless steel, which is stable and durable;

Save investment:The liquid level detector uses 316 stainless steel electrodes to control the start and stop of the water pump, which is sensitive in response, anti-corrosion and durable;

Save running costs:Intelligent control system, PLC smart light control system, can be remotely monitored, takes into account manual and automatic functions, and has protection functions such as phase loss, overload, and anti-rust magnet for water pumps to ensure no overflow.

Subway stations, underground passages, underground garages, underground civil air defense projectssewage liftingemission;

Catering, kitchens, supermarkets, entertainment centers, business buildings, hotels and other commercial service placessewage liftingemission;

Various types of residential areas, villas, civil buildings and other small and medium-sized unmanned sewage transportation station discharge sites;

Harmless treatment and standard discharge of sewage from outpatient clinics and wards of various hospitals.

Product name:Oil separation and lifting integrated equipment

Product material:SUS 304/316 stainless steel

How to operate:Automatically run

Product specifications:pairpumpwith lift

Stirring device:Avoid solidification of waste oil, thereby avoiding blockage of the oil drain pipe.

Sheet metal process:Beautiful appearance and better strength.

Self-developed slag removal equipment:The extracted residue has low moisture content and high slag removal efficiency, which reduces the sedimentation of sludge in the oil separation bin, thereby reducing maintenance frequency and facilitating maintenance.

Programmable touch screen control cabinet:Visual operation allows you to set the heating temperature and fine-tune the automatic execution device to achieve on-demand discharge.

Reliable fluid design:Reduce maintenance frequency and avoid product clogging.

Rich configuration:Various functions are optional and the dimensions can be customized.

Product name:Oil separation and lifting integrated equipment

Product material:SUS 304/316 stainless steel

How to operate:Automatically run

Product specifications:pairpumpwith lift

Stirring device:Avoid solidification of waste oil, thereby avoiding blockage of the oil drain pipe.

Sheet metal process:Beautiful appearance and better strength.

Self-developed slag removal equipment:The extracted residue has low moisture content and high slag removal efficiency, which reduces the sedimentation of sludge in the oil separation bin, thereby reducing maintenance frequency and facilitating maintenance.

Programmable touch screen control cabinet:Visual operation allows you to set the heating temperature and fine-tune the automatic execution device to achieve on-demand discharge.

Reliable fluid design:Reduce maintenance frequency and avoid product clogging.

Rich configuration:Various functions are optional and the dimensions can be customized.

1.The pump has a vertical structure. The inlet and outlet diameters are the same and located on the same center line. It can be installed in the pipeline like a valve. It has a compact and beautiful appearance, a small footprint, and low construction investment. If a protective cover is added, it can be installed For outdoor use.

2. The impeller is directly mounted on the extended shaft of the motor, with short axial size and compact structure. The pump and motor bearings are reasonably configured, which can effectively balance the radial and axial loads generated by the pump operation, thus ensuring the smooth operation of the pump. Vibration noise is very low.

3. The shaft seal adopts a mechanical seal or a combination of mechanical seals. It adopts imported titanium alloy sealing rings, medium-sized high-temperature-resistant mechanical seals, and uses carbide material and wear-resistant seals, which can effectively increase the service life of the mechanical seal.

4. It is easy to install and maintain. There is no need to disassemble the piping system. All the rotor parts can be extracted by removing the pump joint seat nut.

5. The pumps can be operated in series or parallel according to the usage requirements, that is, the flow rate and head.

6. The pump can be installed vertically or horizontally according to the requirements of the pipeline layout.

1. ISG, ISW typeVertical and horizontal pipeline centrifugal pump, used to transport clean water and other liquids with physical and chemical properties similar to clean water. It is suitable for industrial and urban water supply and drainage, pressurized water supply for high-rise buildings, garden sprinkler irrigation,fire booster, long-distance transportation, HVAC and refrigeration cycles, hot and cold water circulation pressurization and equipment matching in bathrooms, etc., operating temperature T

2. IRG (GRG), SWR, ISWRD type hot water (high temperature)circulation pumpWidely used in: Energy, metallurgy, chemical industry, textile, papermaking and boilers in hotels, restaurants and other boilers for pressurized circulation transportation of high-temperature hot water and circulation pumps for urban heating systems. The operating temperature of IRG type is T

3. IHG and SWH type pipeline chemical pumps are used to transport liquids that do not contain solid particles, are corrosive, and have a viscosity similar to water. They are suitable for petroleum, chemical industry, metallurgy, electric power, papermaking, food, pharmaceuticals, synthetic fibers and other departments. Operating temperature It is -20℃~120℃.

4. YG and ISWB type pipeline oil pumps are used to transport gasoline, kerosene, diesel and other petroleum products. The temperature of the transported medium is -20℃~+120℃.

5. ISGD, ISWD low speedcentrifugal pump, suitable for occasions with very low environmental noise requirements and air conditioning circulation.

1. The pump has a vertical structure. The inlet and outlet diameters are the same and located on the same center line. It can be installed in the pipeline like a valve. It has a compact and beautiful appearance, a small footprint, and low construction investment. If a protective cover is added, Can be used outdoors.

2. The impeller is directly mounted on the extended shaft of the motor, with short axial size and compact structure. The pump and motor bearings are reasonably configured, which can effectively balance the radial and axial loads generated by the pump operation, thus ensuring the smooth operation of the pump. Vibration noise is very low.

3. The shaft seal adopts a mechanical seal or a combination of mechanical seals. It adopts imported titanium alloy sealing rings, medium-sized high-temperature-resistant mechanical seals, and uses carbide material and wear-resistant seals, which can effectively increase the service life of the mechanical seal.

4. It is easy to install and maintain. There is no need to disassemble the piping system. All the rotor parts can be extracted by removing the pump joint seat nut.

5. The pumps can be operated in series or parallel according to the usage requirements, that is, the flow rate and head.

6. The pump can be installed vertically or horizontally according to the requirements of the pipeline layout.

1. ISG, ISW typeVertical and horizontal pipeline centrifugal pump, used to transport clean water and other liquids with physical and chemical properties similar to clean water. It is suitable for industrial and urban water supply and drainage, pressurized water supply for high-rise buildings, garden sprinkler irrigation,fire booster, long-distance transportation, HVAC and refrigeration cycles, hot and cold water circulation pressurization and equipment matching in bathrooms, etc., operating temperature T

2. IRG (GRG), SWR, ISWRD type hot water (high temperature)circulation pumpWidely used in: Energy, metallurgy, chemical industry, textile, papermaking and boilers in hotels, restaurants and other boilers for pressurized circulation transportation of high-temperature hot water and circulation pumps for urban heating systems. The operating temperature of IRG type is T

3. IHG and SWH type pipeline chemical pumps are used to transport liquids that do not contain solid particles, are corrosive, and have a viscosity similar to water. They are suitable for petroleum, chemical industry, metallurgy, electric power, papermaking, food, pharmaceuticals, synthetic fibers and other departments. Operating temperature It is -20℃~120℃.

4. YG and ISWB type pipeline oil pumps are used to transport gasoline, kerosene, diesel and other petroleum products. The temperature of the transported medium is -20℃~+120℃.

5. ISGD, ISWD low speedcentrifugal pump, suitable for occasions with very low environmental noise requirements and air conditioning circulation.