Non-clogging submersible sewage pumpIt is based on the introduction of advanced foreign technology and combined with domesticwater pumpA new generation of products successfully developed based on the usage characteristics ofpumpThis kind of product has the characteristics of significant energy saving effect, anti-winding, no clogging, automatic installation and automatic control. It has a unique effect in discharging solid particles and long fiber waste.

The seriespumpIt adopts a unique impeller structure and new type of mechanical seal, which can effectively deliver solid materials and long fibers. Compared with traditional impellers, the impellerpumpThe impeller adopts the form of single flow channel or double flow channel, which is similar to an elbow with the same cross-section size. It has very good flow performance and is equipped with a reasonable scroll chamber, making thepumpIt has high efficiency and the impeller has passed dynamic and static balance tests, making itpumpNo vibration during operation.

Flow range of conveyed liquid:2~6000m3/h

Lift range:3~70m

Supporting power range:0.37~355KW

Caliber range:Ф25~Ф800mm

The medium temperature is

The pH value is in the range of 5~9;

Pump without internal gravity circulation cooling system,

The motor part shall not be exposed to more than 1/2 of the liquid surface;

It cannot be used to pump highly corrosive liquids.

1. The unique single-blade or double-blade impeller structure greatly improves the dirt passing capacity and can effectively pass through the impeller.pump5 times the diameter of the fiber material and the diameter ispumpSolid particles with a diameter of about 50%, and the mechanical seal adopts new hard and corrosion-resistant titanium tungsten material, which canpumpSafe and continuous operation for more than 8,000 hours.

2. The overall structure is compact, small in size, low in noise, significant in energy saving, easy to maintain and requires no construction.pump room, you can work by diving into the water, which greatly reduces the project cost.pumpA high-precision anti-interference water leakage detection sensor is installed in the sealing oil chamber, and thermal components are pre-embedded in the stator winding.water pumpAutomatic motor protection.

3. A fully automatic control cabinet can be equipped according to user needs.pumpAutomatic protection of water leakage, electric leakage, overload and over-temperature, etc., which improves the safety and reliability of the product. The float switch can automatically control according to the required liquid level changes.pumpThe starting and stopping of the machine does not require special supervision and is extremely convenient to use.

4. The WQ series can be equipped with a double guide rail automatic coupling installation system according to user needs, which brings greater convenience to installation and maintenance. People do not have to enter the sewage pit for this, and can be used within the full lift, while ensuring that the motor will not pass overload.

5. There are two different installation methods, fixed automatic coupling installation system and mobile free installation system.

Suitable for chemical industry, petroleum, pharmaceutical, mining, paper industry, cement plant, steel plant, power plant, coal processing industry, and citiessewage treatmentIt can also be used to pump clean water and corrosive media to remove particles of sewage and dirt from conveyor belts in factory drainage systems, municipal engineering, construction sites and other industries.

Non-clogging submersible sewage pumpIt is based on the introduction of advanced foreign technology and combined with domesticwater pumpA new generation of products successfully developed based on the usage characteristics ofpumpThis kind of product has the characteristics of significant energy saving effect, anti-winding, no clogging, automatic installation and automatic control. It has a unique effect in discharging solid particles and long fiber waste.

The seriespumpIt adopts a unique impeller structure and new type of mechanical seal, which can effectively deliver solid materials and long fibers. Compared with traditional impellers, the impellerpumpThe impeller adopts the form of single flow channel or double flow channel, which is similar to an elbow with the same cross-section size. It has very good flow performance and is equipped with a reasonable scroll chamber, making thepumpIt has high efficiency and the impeller has passed dynamic and static balance tests, making itpumpNo vibration during operation.

Flow range of conveyed liquid:2~6000m3/h

Lift range:3~70m

Supporting power range:0.37~355KW

Caliber range:Ф25~Ф800mm

The medium temperature is

The pH value is in the range of 5~9;

Without internal gravity circulation cooling systempump,

The motor part shall not be exposed to more than 1/2 of the liquid surface;

It cannot be used to pump highly corrosive liquids.

1. The unique single-blade or double-blade impeller structure greatly improves the dirt passing capacity and can effectively pass through the impeller.pump5 times the diameter of the fiber material and the diameter ispumpSolid particles with a diameter of about 50%, and the mechanical seal adopts new hard and corrosion-resistant titanium tungsten material, which canpumpSafe and continuous operation for more than 8,000 hours.

2. The overall structure is compact, small in size, low in noise, significant in energy saving, and easy to maintain. There is no need to build a pump room and it can work when submerged in water, which greatly reduces the project cost.pumpA high-precision anti-interference water leakage detection sensor is installed in the sealing oil chamber, and thermal components are pre-embedded in the stator winding.water pumpAutomatic motor protection.

3. A fully automatic control cabinet can be equipped according to user needs.pumpAutomatic protection of water leakage, electric leakage, overload and over-temperature, etc., which improves the safety and reliability of the product. The float switch can automatically control according to the required liquid level changes.pumpThe starting and stopping of the machine does not require special supervision and is extremely convenient to use.

4. The WQ series can be equipped with a double guide rail automatic coupling installation system according to user needs, which brings greater convenience to installation and maintenance. People do not have to enter the sewage pit for this, and can be used within the full lift, while ensuring that the motor will not pass overload.

5. There are two different installation methods, fixed automatic coupling installation system and mobile free installation system.

Suitable for chemical industry, petroleum, pharmaceutical, mining, paper industry, cement plant, steel plant, power plant, coal processing industry, and citiessewage treatmentIt can also be used to pump clean water and corrosive media to remove particles of sewage and dirt from conveyor belts in factory drainage systems, municipal engineering, construction sites and other industries.

Flow range of conveyed liquid:2~6000m3/h

Lift range:3~70m

Supporting power range:0.37~355KW

Caliber range:Ф25~Ф800mm

The medium temperature is

The pH value is in the range of 5~9;

Without internal gravity circulation cooling systempump,

The motor part shall not be exposed to more than 1/2 of the liquid surface;

It cannot be used to pump highly corrosive liquids.

1. The unique single-blade or double-blade impeller structure greatly improves the dirt passing capacity and can effectively pass through the impeller.pump5 times the diameter of the fiber material and the diameter ispumpSolid particles with a diameter of about 50%, and the mechanical seal uses a new type of hard and corrosion-resistant titanium tungsten material, which canpumpSafe and continuous operation for more than 8,000 hours.

2. The overall structure is compact, small in size, low in noise, significant in energy saving, easy to maintain and requires no construction.pump room, you can work by diving into the water, which greatly reduces the project cost.pumpA high-precision anti-interference water leakage detection sensor is installed in the sealing oil chamber, and thermal components are pre-embedded in the stator winding.water pumpAutomatic motor protection.

3. A fully automatic control cabinet can be equipped according to user needs.pumpAutomatic protection of water leakage, electric leakage, overload and over-temperature, etc., which improves the safety and reliability of the product. The float switch can automatically control according to the required liquid level changes.pumpThe starting and stopping of the machine does not require special supervision and is extremely convenient to use.

4. The WQ series can be equipped with a double guide rail automatic coupling installation system according to user needs, which brings greater convenience to installation and maintenance. People do not have to enter the sewage pit for this, and can be used within the full lift, while ensuring that the motor will not pass overload.

5. There are two different installation methods, fixed automatic coupling installation system and mobile free installation system.

Suitable for chemical industry, petroleum, pharmaceutical, mining, paper industry, cement plant, steel plant, power plant, coal processing industry, and citiessewage treatmentIt can also be used to pump clean water and corrosive media to remove particles of sewage and dirt from conveyor belts in factory drainage systems, municipal engineering, construction sites and other industries.

Flow range of conveyed liquid:2~6000m3/h

Lift range:3~70m

Supporting power range:0.37~355KW

Caliber range:Ф25~Ф800mm

The medium temperature is

The pH value is in the range of 5~9;

Without internal gravity circulation cooling systempump,

The motor part shall not be exposed to more than 1/2 of the liquid surface;

It cannot be used to pump highly corrosive liquids.

1. The unique single-blade or double-blade impeller structure greatly improves the dirt passing capacity and can effectively pass through the impeller.pump5 times the diameter of the fiber material and the diameter ispumpSolid particles with a diameter of about 50%, and the mechanical seal adopts new hard and corrosion-resistant titanium tungsten material, which canpumpSafe and continuous operation for more than 8,000 hours.

2. The overall structure is compact, small in size, low in noise, significant in energy saving, easy to maintain and requires no construction.pump room, you can work by diving into the water, which greatly reduces the project cost.pumpA high-precision anti-interference water leakage detection sensor is installed in the sealing oil chamber, and thermal components are pre-embedded in the stator winding.water pumpAutomatic motor protection.

3. A fully automatic control cabinet can be equipped according to user needs.pumpAutomatic protection of water leakage, electric leakage, overload and over-temperature, etc., which improves the safety and reliability of the product. The float switch can automatically control according to the required liquid level changes.pumpThe starting and stopping of the machine does not require special supervision and is extremely convenient to use.

4. The WQ series can be equipped with a double guide rail automatic coupling installation system according to user needs, which brings greater convenience to installation and maintenance. People do not have to enter the sewage pit for this, and can be used within the full lift, while ensuring that the motor will not pass overload.

5. There are two different installation methods, fixed automatic coupling installation system and mobile free installation system.

Suitable for chemical industry, petroleum, pharmaceutical, mining, paper industry, cement plant, steel plant, power plant, coal processing industry, and citiessewage treatmentIt can also be used to pump clean water and corrosive media to remove particles of sewage and dirt from conveyor belts in factory drainage systems, municipal engineering, construction sites and other industries.

Non-clogging submersible sewage pumpIt is based on the introduction of advanced foreign technology and combined with domesticwater pumpThe new generation of pump products successfully developed based on the usage characteristics has the characteristics of significant energy saving effect, anti-winding, no clogging, automatic installation and automatic control. It has a unique effect in discharging solid particles and long fiber waste.

This series of pumps adopts a unique impeller structure and new type of mechanical seal, which can effectively deliver solids and long fibers. Compared with traditional impellers, the impeller of this pump adopts the form of single flow channel or double flow channel. It is similar to an elbow with the same cross-sectional size. It has very good flowability and is equipped with a reasonable volute, making the pump highly efficient. The impeller and impeller have undergone dynamic and static balance tests to ensure that the pump does not vibrate during operation.

Flow range of conveyed liquid:2~6000m3/h

Lift range:3~70m

Supporting power range:0.37~355KW

Caliber range:Ф25~Ф800mm

The medium temperature is

The pH value is in the range of 5~9;

Pump without internal gravity circulation cooling system,

The motor part shall not be exposed to more than 1/2 of the liquid surface;

It cannot be used to pump highly corrosive liquids.

1. It adopts a unique single-blade or double-blade impeller structure, which greatly improves the dirt passing capacity. It can effectively pass 5 times the fiber material of the pump caliber and solid particles with a diameter of about 50% of the pump caliber. The mechanical seal adopts a new type of hard material. The corrosion-resistant titanium tungsten material allows the pump to operate safely and continuously for more than 8,000 hours.

2. The overall structure is compact, small in size, low in noise, significant in energy saving, and easy to maintain. There is no need to build a pump room and it can work when submerged in water, which greatly reduces the project cost. The sealing oil chamber of the pump is equipped with a high-precision anti-interference water leakage detection system. The sensor has a thermal element embedded in the stator winding.water pumpAutomatic motor protection.

3. A fully automatic control cabinet can be equipped according to user needs to automatically protect the pump from water leakage, leakage, overload and over-temperature, etc., which improves the safety and reliability of the product. The float switch can automatically adjust the pump according to the required liquid level changes. It controls the starting and stopping of the pump without the need for special supervision and is extremely convenient to use.

4. The WQ series can be equipped with a double guide rail automatic coupling installation system according to user needs, which brings greater convenience to installation and maintenance. People do not have to enter the sewage pit for this, and can be used within the full lift, while ensuring that the motor will not pass overload.

5. There are two different installation methods, fixed automatic coupling installation system and mobile free installation system.

Suitable for chemical industry, petroleum, pharmaceutical, mining, paper industry, cement plant, steel plant, power plant, coal processing industry, and citiessewage treatmentIt can also be used to pump clean water and corrosive media to remove particles of sewage and dirt from conveyor belts in factory drainage systems, municipal engineering, construction sites and other industries.

Self-priming pumpIt is self-primingcentrifugal pump, it has the advantages of compact structure, easy operation, smooth operation, convenient maintenance, high efficiency, long life, and strong self-priming ability. There is no need to install a bottom valve in the pipeline, just keep it before workpumpOnly a quantitative amount of fluid can be stored in the body, thus simplifying the pipeline system and improving working conditions.

Flow range of conveyed liquid:1.8~1400m°/h

Lift range:

Supporting power range:0.37~355KN

Rated speed:2960r/min, 1480rmin or 980r/min

Ambient temperature

The volume content of solid particles in the conveyed medium does not exceed unit

0.1% of the volume, particle size

orpumpThe maximum working pressure of the system is ≤1.6MPa,

Right nowpumpSuction pressure+pumpLift ≤1.6MPa.

1. Suitable for urban environmental protection, construction, fire protection, chemical industry, pharmaceuticals, dyes, printing and dyeing, brewing, electric power, electroplating, papermaking, petroleum, mining, equipment, cooling, tanker unloading, etc.

2. Suitable for clean water, sea water, chemical media liquids with acidity and alkalinity, and slurries with a similar pasty state (medium viscosity ≤ 100 centipoise, solid content up to 30% or less)

3. Equipped with a rocker-type sprinkler head, the water can be flushed into the air and dispersed into fine raindrops for spraying. It is a good machine for farms, nurseries, orchards, and tea gardens.

4. It can be used with any model and specification of filter press. It is the most ideal match to send the slurry to the filter for press filtering.pump.